Xinze Yang

Nov 7, 2024 | 4spepublications.onlinelibrary.wiley.com | Jiahao Xu |Xinze Yang |Chunhua Zhang |Zexuan Hu |Jiajing Zhang |Liangjun Xia | +2 more

REFERENCES 1, , , et al. Enhanced thermal conductivity of carbon nitride-doped graphene/polyimide composite film via a “deciduous-like” strategy. Compos Sci Technol. 2021; 205:108693. doi:10.1016/j.compscitech.2021.108693 2, , , , , . Thermally conductive polymer-based composites: fundamentals, progress and flame retardancy/anti-electromagnetic interference design. J Mater Chem C. 2022; 10(39): 14399-14430. doi:10.1039/D2TC03306B 3, , , et al.

May 4, 2023 | mdpi.com | Xinze Yang |Jiajing Zhang |Liangjun Xia |Jiahao Xu

2. Results and Discussion 2.1. Characterization of BNXRD and FTIR analyses were performed to determine the composition of the particles. As shown in Figure 1b,c, the XRD pattern of the BN reveals the characteristic diffraction peaks at 26.7, 41.7, 43.9, 50.2, and 55.1°, which correspond to the (002), (100), (101), (102), and (004) planes, respectively [26].

Mar 6, 2023 | mdpi.com | Xinze Yang |Jiajing Zhang |Bin Shang |Xuenan Sun

2. Results and Discussion 2.1. GL Modification of CNCsThe surface modification of CNC with GL is depicted in Figure 1b. To demonstrate that the CNCs were successfully modified by GL, a SEM study was performed on the CNC and GLCNC. As shown in Figure 1c, the surface of the GLCNCs was rougher than that of the CNCs. Furthermore, the appearance of Si in the GLCNCs indicates that GL was successfully grafted onto the surface of the CNC (Figure 1d,e).